PEERPSI Posted October 1, 2012 Share Posted October 1, 2012 What manual or guide should I reference for a list of the M variables the Advantage 900 CNC system would use? Link to comment Share on other sites More sharing options...
cncguru Posted October 2, 2012 Share Posted October 2, 2012 All of the M-Variables used in the Advantage 900 system are in the header files. Adv900.h, Address.h, Oem.h, and a End User Specific header file "YourMachine"_UserDefines.h. These do not match the suggested M-Variables at the end of the Software Reference Manual so be careful with that. This is also the names used through out the GMT Files and the Standard Plc's & Pmc's. Link to comment Share on other sites More sharing options...
Recommended Posts