wlewis Posted December 27, 2018 Share Posted December 27, 2018 We have a recently purchased 8 Axis MACRO CPU that is not saving all the configuration values. Most values are saved, but the ms0,mi112 and ms0,mi113 values used for setting the power-up position source address are not saved by the 'mssave 0' command. These need to be set manually each time we reset the UMAC MACRO chassis. UMAC MACRO CPU Firmware version: 1.120 UMAC MACRO CPU Firmware date: 03/27/17 PowerPMAC CPU firmware version: 2.0.2.14 IDE version: 4.1.0.24 Link to comment Share on other sites More sharing options...
steve.milici Posted January 4, 2019 Share Posted January 4, 2019 Contact the support group with the board's s/n: support@deltatau.com. These should be getting saved. Link to comment Share on other sites More sharing options...
Recommended Posts