MDustan Posted July 12, 2018 Share Posted July 12, 2018 Hi, I attempted to upgrade the firmware of my CK3E-1410 to version 2.4.1.2 I believe I followed the instructions to the letter, however when connecting to the card through the IDE and entering the system setup window I get the error: "Cannot start set master state to INIT (Result = ERROR: Invalid state (0x9811000e))" Typing ecatreset into the terminal does not resolve this issue. I tried to downgrade the card using the reverse process but on completion I still have the same error: "Cannot start set master state to INIT (Result = ERROR: Invalid state (0x9811000e))" I can provide a dump of the contents of the serial window on boot up if that helps. Link to comment Share on other sites More sharing options...
MDustan Posted July 16, 2018 Author Share Posted July 16, 2018 Attaching a slave to the network seems to fix things. Link to comment Share on other sites More sharing options...
Recommended Posts