Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ACC72E communication error.
This sounds like a hardware problem with the ACC-72E card. Any failure of this card would not typically cause a PMAC WD unless the failure interferes with the +5V DC power of the UMAC or causes serious DPRAM issues that would interfere with PMAC’s low level communication.

If all LEDs are off on the ACC-24E2A this may indicate the card is not getting power.

Contact the TSG group at with more details on the installed hardware.

Messages In This Thread
RE: ACC72E communication error. - steve.milici - 05-24-2018, 11:04 AM

Forum Jump:

Users browsing this thread: 1 Guest(s)