Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ellipse in motion program
#12
Hi Louv,

the code in previous post is in Power PMAC format , not Turbo.
Please change the transformation matrix setting as below, and ignore Gather.Enable command, which is for Power PMAC only.
Also, command tsel -1 is not for Turbo. Please use tsel 0 instead.


TSEL 1 ; Select Matrix 1
TINIT; initialize Matrix 1
Q40=1.5 Q41=-0.5 Q42=0 ; Variables for first row
Q43=-0.5 Q44=1.5 Q45=0 ; Variables for second row
Q46=0 Q47=0 Q48=1 ; Variables for third row
AROT 40 ; Assign these values to the rotation portion
Reply


Messages In This Thread
ellipse in motion program - dholden - 12-12-2012, 09:33 PM
RE: ellipse in motion program - JayL - 12-14-2012, 10:25 AM
RE: ellipse in motion program - lovu - 08-08-2017, 05:12 PM
RE: ellipse in motion program - Gregs - 08-09-2017, 10:36 AM
RE: ellipse in motion program - lovu - 08-09-2017, 05:48 PM
RE: ellipse in motion program - AAnikstein - 08-10-2017, 09:03 AM
RE: ellipse in motion program - lovu - 08-11-2017, 02:17 AM
RE: ellipse in motion program - JayL - 08-11-2017, 10:14 AM
RE: ellipse in motion program - JayL - 08-14-2017, 01:15 PM
RE: ellipse in motion program - JayL - 08-14-2017, 04:33 PM
RE: ellipse in motion program - JayL - 08-15-2017, 10:30 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)