Delta Tau Forums
serial cable pinouts - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: FAQ (http://forums.deltatau.com/forumdisplay.php?fid=5)
+--- Thread: serial cable pinouts (/showthread.php?tid=654)



serial cable pinouts - DavisG - 09-07-2011

For those who need a serial cable ( RS232 or RS485 ) connection to a pmac board of any age I have attached the pdf containing all serial cable pinouts.

Note: If using the old 26 pin connector the easiest thing is to use a press on ribbon cable DB25 connector to a press on ribbon cable IDC26 connector. Cut wire 26 at the DB25. Then use a standard DB25 to DB9 adapter. If using the 10 pin connector the easiest thing is to use a press on ribbon cable DB9 connector to a press on ribbon cable IDC10 connector. Cut wire 10 at the DB9.

for search compatibility - RS-232 or RS-485