Delta Tau Forums
Hardware 1/T Enable OneOverTEna - until when will it work - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Power PMAC (http://forums.deltatau.com/forumdisplay.php?fid=2)
+--- Thread: Hardware 1/T Enable OneOverTEna - until when will it work (/showthread.php?tid=2868)



Hardware 1/T Enable OneOverTEna - until when will it work - sutty - 04-09-2019

Hi!

Using a PMAC2-style Servo IC (DSPGate1 Rev D, like in Acc24E2) by when will OneOverTEna (Hardware 1/T) be available on Power PMAC?!

Best Regards,
Anton


RE: Hardware 1/T Enable OneOverTEna - until when will it work - steve.milici - 04-09-2019

Use of the hardware 1/T interpolation of the PMAC2-style Servo ICs is not supported for servo position by the Power PMAC firmware and there is no plan to implement this at this time.

Use the equivalent option of the ACC-24E3 instead.