Delta Tau Forums
Bug report on serial console - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Power PMAC (http://forums.deltatau.com/forumdisplay.php?fid=2)
+--- Thread: Bug report on serial console (/showthread.php?tid=2852)



Bug report on serial console - rvanderbijl - 03-13-2019

We're using a Power PMAC 465 CPU with the Etherlab EtherCAT stack. The system wasn't running much last night (aside from EtherCAT with one device), and when I looked at the system this morning, it was frozen and the IDE (4, latest) had lost connection to the PMAC.
The serial console showed the following:

ecm0: BUG! Tx Ring full when queue awake!
ecm0: BUG! Tx Ring full when queue awake!
ecm0: BUG! Tx Ring full when queue awake!
ecm0: BUG! Tx Ring full when queue awake!
ecm0: BUG! Tx Ring full wh

And yes, the last line was literally cut off like that (guess that's when it crashed).

Firmware 2.4.0.180.

Any suggestions?


RE: Bug report on serial console - steve.milici - 03-13-2019

This would be a technical support issue.
Please contact ODT's technical support with a full serial port boot response:
support@deltatau.com