Delta Tau Forums
PDK ExecCommand - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Power PMAC (http://forums.deltatau.com/forumdisplay.php?fid=2)
+--- Thread: PDK ExecCommand (/showthread.php?tid=2829)



PDK ExecCommand - daves - 01-30-2019

Please can you confirm the units of the timeout parameter of ISyncTerminalCommunicationInterface.ExecCommand

The documentation does not make this clear if it is ms, seconds, years. It looks like seconds when I had to put 10 in to allow a 4s operation to complete, but I want to check this was not coincidence.

The doc is also incorrect for the overload list

"ExecCommand(String, Int32)
Receive the Operating System(OS) string command or PowerPMAC command and 'out' the OS string response."


RE: PDK ExecCommand - steve.milici - 02-04-2019

This is in units of seconds.

The documentation error has been forwarded to the development team.