Delta Tau Forums
Time and date - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Power PMAC (http://forums.deltatau.com/forumdisplay.php?fid=2)
+--- Thread: Time and date (/showthread.php?tid=28)



Time and date - bradp - 09-29-2008

Can I access the time and date from a C PLC?


RE: Time and date - bradp - 09-29-2008

brad Wrote:Can I access the time and date from a C PLC?

When you make a C PLC you need to include the header time.h. Then all the standard time and date functions are available. Time.h is not included by default.