Delta Tau Forums
GeoMACRO BiSS-C encoder support - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Non-Turbo PMAC (http://forums.deltatau.com/forumdisplay.php?fid=4)
+--- Thread: GeoMACRO BiSS-C encoder support (/showthread.php?tid=2758)



GeoMACRO BiSS-C encoder support - wlewis - 09-12-2018

Is there an option available for BiSS-C encoder support on the GeoMACRO drive?


RE: GeoMACRO BiSS-C encoder support - Gregs - 04-22-2019

No Biss C. These are the current options:

Feedback Options
0 = No options, Default; Standard feedback
per axis is quadrature differential
encoder with hall effect inputs or SSI
absolute encoder .
1 = Analog Feedback including :
• Option 0 Standard Feedback
• 4096x Sin/Cos interpolator
• Resolver Interface
2 = Absolute Feedback including :
• Option 1 Analog Feedback
• Endat™
• Hiperface™

However, a Biss C option is not unlikely in the future.