Delta Tau Forums
How to add 2 axes to a PowerPmacNc16-SDK project - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Power PMAC-NC (http://forums.deltatau.com/forumdisplay.php?fid=26)
+--- Thread: How to add 2 axes to a PowerPmacNc16-SDK project (/showthread.php?tid=2680)



How to add 2 axes to a PowerPmacNc16-SDK project - andreychip - 04-23-2018

Hello.
How to add 2 axes to the PowerPmacNc16-SDK project, the B-axis (circular) and the W-axis (axis built-in to the spindle), and change the subprog ComputeNCTransform?


RE: How to add 2 axes to a PowerPmacNc16-SDK project - vinceb - 04-27-2018

In general we don't transform the rotary axes other than the addition of offsets. I will send you an example project which show how 5-axis were added to a project.


RE: How to add 2 axes to a PowerPmacNc16-SDK project - andreychip - 04-27-2018

(04-27-2018, 02:06 PM)vinceb Wrote: In general we don't transform the rotary axes other than the addition of offsets. I will send you an example project which show how 5-axis were added to a project.
my username on GitHub AndreyErsted. My mail: Andrey.krasnynsky@gmail.com.

Thanks, I'll wait.
Andrey.


RE: How to add 2 axes to a PowerPmacNc16-SDK project - andreychip - 05-15-2018

(04-27-2018, 02:06 PM)vinceb Wrote: In general we don't transform the rotary axes other than the addition of offsets. I will send you an example project which show how 5-axis were added to a project.
Hello!
How to get an example ?
Best regards.
Andrey.