Delta Tau Forums
PLCC 56k maximum memory exceeded - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Turbo PMAC (http://forums.deltatau.com/forumdisplay.php?fid=6)
+--- Thread: PLCC 56k maximum memory exceeded (/showthread.php?tid=2512)



PLCC 56k maximum memory exceeded - buaame414 - 08-11-2017

hello, There is a problem when I download my servo program
Error:1:PLCC Err´╝ÜPLCC 56k maximum memory exceeded
How to fix it up?


RE: PLCC 56k maximum memory exceeded - Gregs - 08-14-2017

Sounds like either it is being attempted to download PLCC programs for a PMAC with extra memory into a PMAC with smaller memory, or PLCC programs have been increased too much in size; therefore, the solution is to either reduce the size of PLCC programs or, if possible, increase the size of PMAC memory. For instance, the UMAC CPU can have either 128Kx24 or 512Kx24 for compiled/assembled program memory.


RE: PLCC 56k maximum memory exceeded - buaame414 - 08-14-2017

Thank you I will do it again.