Delta Tau Forums
Stepper control using PCI-PMAC & Acc8D-Opt 2A on WinXP - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Non-Turbo PMAC (http://forums.deltatau.com/forumdisplay.php?fid=4)
+--- Thread: Stepper control using PCI-PMAC & Acc8D-Opt 2A on WinXP (/showthread.php?tid=2277)



Stepper control using PCI-PMAC & Acc8D-Opt 2A on WinXP - killerisation - 08-15-2016

Hi,

I have a XYZ table that uses brushed motors that is working nicely, but I want to add another (rotary, stepper motor) axis and I need help setting it up.

I believe I have all the right hardware, which consists of:
- NEMA 23HD450Y-31A6 stepper motor
- Single Axis 4A TB6600 Hybrid Stepper Motor Driver
- Meanwell S-50-12 12v power supply
- Accessory 8D breakout board with Option 2A V-F converter
- 8-axis PMAC-PCI v105B
- PEWin32Pro2 v4.4.0.0 running on Windows XP

At present the terminal says "Communication Established to PMAC-0" but I am unsure what parameters to set and the 500+pg manual looks pretty daunting.

Thanks in advance.


RE: Stepper control using PCI-PMAC & Acc8D-Opt 2A on WinXP - Gregs - 08-16-2016

Note that this question is more of a tech support matter and has been moved to Support@DeltaTau.com.