Delta Tau Forums
Auto and MDI alarm. MACHINE DOWN! - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Turbo PMAC (http://forums.deltatau.com/forumdisplay.php?fid=6)
+---- Forum: PMAC NC PRO2 (http://forums.deltatau.com/forumdisplay.php?fid=23)
+---- Thread: Auto and MDI alarm. MACHINE DOWN! (/showthread.php?tid=2070)



Auto and MDI alarm. MACHINE DOWN! - kramrellim - 11-16-2015

System was running fine.
Now whenever I switch into Auto mode or MDI mode I get this alarm
"Syntax Fatal: Can Not Close Rotary Buffer! File C:\Part Progams\......"

I noticed the rotary buffer display on the NC display "Buffer Closed" "0/0"

This alarm locks up the NC software!


RE: Auto and MDI alarm. MACHINE DOWN! - steve.milici - 11-16-2015

Please contact our technical support group with details on the machine setup: support@deltatau.com