Delta Tau Forums
Power Brick Controller Manual - Printable Version

+- Delta Tau Forums (http://forums.deltatau.com)
+-- Forum: Delta Tau Data Systems (http://forums.deltatau.com/forumdisplay.php?fid=1)
+--- Forum: Power PMAC (http://forums.deltatau.com/forumdisplay.php?fid=2)
+---- Forum: Manuals and Documentation (http://forums.deltatau.com/forumdisplay.php?fid=22)
+---- Thread: Power Brick Controller Manual (/showthread.php?tid=1845)



Power Brick Controller Manual - *** - 02-18-2015

Has been posted to File Depot.

Please report inconsistencies and post related questions / comments here.

Your feedback is appreciated.


RE: Power Brick Controller Manual - Richard - 07-21-2015

Power Brick Controller User Manual updated & released


RE: Power Brick Controller Manual - Richard - 07-20-2017

An updated version of the Power Brick Controller User Manual has been posted in FileDepot


RE: Power Brick Controller Manual - tehmonk - 03-29-2019

"Do not mix topologies for outputs. They are all either sinking or sourcing per connector (X16 / X17)." p.103 should be X15/X16.

Please redraw diagram on p.104 to clarify input and output commons. Typical usage in my experience has been to implement a single topology (i.e. all PNP or all NPN, not split between PNP/NPN inputs and outputs). As it is, descriptions for pins 11/29 on X15/X16 are confusing (COM_EMT and COM_COL imply opposing terminals of a transistor yet both diagrams on p.104 show them connected to the same reference voltage).