Delta Tau Forums

Full Version: serial cable pinouts
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

DavisG

For those who need a serial cable ( RS232 or RS485 ) connection to a pmac board of any age I have attached the pdf containing all serial cable pinouts.

Note: If using the old 26 pin connector the easiest thing is to use a press on ribbon cable DB25 connector to a press on ribbon cable IDC26 connector. Cut wire 26 at the DB25. Then use a standard DB25 to DB9 adapter. If using the 10 pin connector the easiest thing is to use a press on ribbon cable DB9 connector to a press on ribbon cable IDC10 connector. Cut wire 10 at the DB9.

for search compatibility - RS-232 or RS-485