Delta Tau Forums

Full Version: Where do I get the PPmac latest firmware and IDE? (Aug. 2020 Edition)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
As of late 2020, the locations for the firmware and IDE have moved. Previous versions of both are still being kept on the Delta Tau website, available through the File Depot for firmware (forums account required) and the Software Center Updates page for software. However, the distribution methods for each have changed for future versions.

Future versions of the IDE are available instead from the Omron Industrial Automation website: https://automation.omron.com/en/us/produ...PMAC%20IDE

Future versions of firmware can typically be distributed directly to customers through Omron Distributors rather than being available for download for anyone. If you need to upgrade the firmware on your unit or obtain a specific other version, contact your Omron Distributor for more information. You may need to provide some information about the product so that the correct file and procedure are provided. These can be obtained by issuing "CPU", "TYPE", and "VERS" into the terminal window, so please be prepared to provide the responses to these commands, too.



NOTE: Users have occasionally reported xml errors when attempting to download some of these links. If that occurs, please try again later (these are intermittent issues) or contact your local Omron office and we will try to get you the files another way.
The link on the Omron website seems broken. Worked a few weeks ago.

<?xml version="1.0" encoding="ISO-8859-1"?>
<Error>
<Code>AccessDenied</Code>
<Message>Request has expired</Message>
<X-Amz-Expires>21600</X-Amz-Expires>
<Expires>2020-09-10T18:56:20Z</Expires>
<ServerTime>2020-09-11T03:09:57Z</ServerTime>
<RequestId>49A2AABDAC05A67E</RequestId>
<HostId>LvJzy0IA39ti1CA5JfWrgKbtl4FvOyj5XM/u7mq2LFG92mNwlrDTHPHa2ldOV5F41k5kvBuiYrg=</HostId>
</Error>
It looks like it just went down for a few hours for some reason--it was down last night (I tested it, too), but it appears to be working again now.
Power PMAC IDE v4.4.1.7 has been released and is now available on the Omron Website through the "Power PMAC IDE Download" link.
(10-13-2020, 10:37 AM)AAnikstein Wrote: [ -> ]Power PMAC IDE v4.4.1.7 has been released and is now available on the Omron Website through the "Power PMAC IDE Download" link.

Links please? The previous link is dead.